Multistage Pumps

TK-TL-TM Series

This rugged range of centrifugal horizontal multistage pumps ideal for applications such as irrigation systems such as those used with centre or lateral pivot irrigators, high pressure lifting, fire duty pumps, industrial processes, heating, cleaning, boiler systems, refrigeration and even snow making.

The TK-TL-TM are available in horizontal (TK/TL/TM and TKB/TMB) or vertical (TKV/TMV) orientation and are driven via flexible coupling either by electric motor or diesel engine. The outlet port on many models can be positioned vertically up (standard) or at 90 degrees either left or right. Multiple outlet ports can be fitted on various stages for different duties with the one pump such as used in fire services.
Note; TM series being discontinued 2019, replaced by TK-TL series

Product Details

GENERAL INFORMATION
Series	TK-TL-TM Series	Applications	Irrigation systems, high pressure lifting, fire duty pumps, industrial processes, heating, cleaning, boiler systems, refrigeration, and snow making
Orientation	Horizontal (TK/TL/TM, TKB/TMB) or Vertical (TKV/TMV)	Drive Type	Flexible coupling via electric motor or diesel engine
Outlet Port	Vertical up (standard) or 90° left/right; multiple outlet ports available	Note	TM series discontinued 2019, replaced by TK-TL series
FEATURES
Suction Body	Axial flow (TM) or radial flow (TK, TL, TKB/TMB, TKV/TMV)	Drive Bearing Support	High rigidity
Shaft	Stainless steel, completely protected	Seal	Adjustable packing or mechanical (balanced/unbalanced)
Tie Rods	External for tightening intermediate stages	Wear Rings	Front and rear wear rings to protect diffusers, stage body, and impellers
Maximum Working Pressure	40 bar or 63 bar (depending on version)	Suction Flanges	PN 10 and PN 16
Delivery Flanges	PN 40 (PN 63 on request)	Outlet Orientation	Can be positioned in three directions
Liquid Temperature	-15°C to +40°C	Impellers & Diffusers	Stainless steel (fire use) or cast iron
Body Material	Cast iron or carbon steel suction/delivery/stage castings	Protection Bushes	Stainless steel 461
OPTIONS
Full Stainless Steel Model	AISI 316	Optional Shaft	Duplex AISI 630 (on request)
Optional Flange	PN 63 outlet flange	Seal Options	Mechanical seal or packing gland
Bearing Type	Oil-soaked bearings with constant level oil feeder	Special Elastomers	Available for specific liquids or temperatures
Mounting	Base-mounted with pump coupled to drive motor (electric or diesel)	Multi-Port Outlets	2, 3, or 4 outlets

Specifications

TK/TM, TKB/TMB, TKV/TMV

2,950 rpm models
65, 80 and 100 nominal outlet diameter
60 to 310 m³/h flow
642 metres maximum head
40 or 63 bar nominal pressure
160 kW up to 560 kW maximum power
90°C temperature of pumped liquid
65 g/m³ maximum solids content
2 minutes maximum with closed delivery

1,450 rpm models
65, 80 and 100 nominal outlet diameter
30 to 210 m³/h flow
280 metres maximum head
40 or 63 bar nominal pressure
45 kW up to 250 kW maximum power
90°C temperature of pumped liquid
65 g/m³ maximum solids content
2 minutes maximum with closed delivery

3,550 rpm models
65, 80 and 100 nominal outlet diameter
70 to 300 m³/h flow
608 metres maximum head
40 or 63 bar nominal pressure
200 kW up to 630 kW maximum power
90°C temperature of pumped liquid
65 g/m³ maximum solids content
2 minutes maximum with closed delivery

1,750 rpm models
65, 80 and 100 nominal outlet diameter
30 to 220 m³/h flow
400 metres maximum head
40 or 63 bar nominal pressure
45 kW up to 630 kW maximum power
90°C temperature of pumped liquid
65 g/m³ maximum solids content
2 minutes maximum with closed delivery

Contact Me

Your email address will not be published. Required fields are marked *>